Variable Switching DC Power Supply HY3020EX 0-30V 0-20A

$400.00 $239.95

(Bulk discounts available)

5.0 average, based on 1 reviews

Manufacturer: VOLTEQ

Stock Level: 20

Product Information

VOLTEQ HY3020EX is a high current, high voltage regulated variable switchig DC power supply, and is similar to HY3020E but with built-in over-voltage and over-current protection, ideal for battery charging, DC motors, anodizing and plating applications. HY3020EX has the maximum DC power of 600W. This high quality regulated power supply can be continuously adjustable at 0-30V DC and 0-20A. The unit comes with 2 LED displays, providing accurate and clearly visible readout for the voltage and current value. This unit has toggle switch at the back that allows you to operate it in 110V AC or 220V AC. Retails well over $400. 

Features & Specifications:

  • Two level of control for both current and voltage outputs: coarse and fine for ease of use
  • Outputs: 0-30 V and 0-20 A
  •  Protection: over-voltage and over-current protection
  • Input voltage: 110V AC and 220V AC switchable
  • Voltage Stabilization: <=0.2%
  •  Current Stabilization: <=0.5%
  • Load Regulation: <=0.3%
  • Ripple noise: CV <= 1%
  • LCD reading accuracy: +/-1% +/-1 digit
  • Environment: 0-40C, relative humidity < 90%
  • Size: 12" x 10" x 6"
  • Weight: 12 lbs
  • Warranty: 1 year

 Switching Power Supply HY3020EX
 Switching Power Supply HY3020EX

Product Code: HY3020EX

Quantity Discounts

You can save money on this item when you purchase several at a time. The table below shows the minimum quantities required to benefit from this offer, and how much they'll cost.

Quantity Price per unit
1+ $239.95

Customer Reviews

Average Rating: 5

Nice Supply, So Far So Good!

I have only used this for a few days but everything appears to work great. I requested a copy of the owner's manual from Voltek through the CHAT! feature and they emailed me a PDF immediately so I was able to review the manual before buying. A few warnings were contained in the manual that I am being careful to follow: 1) Don't turn on or off the supply with a load connected to it, especially if it is an inductive type load. 2) Don't run the supply continuously at max amps and volts (one of these needs to be at 80% or so.) I am mostly working in the 13.8 volt area, so not a problem. Note that the supply DOES NOT come with test leads so you need to order those with the supply. I assumed they came with test leads so I needed to order them after the supply arrived. Recommendation to Volteq: Since many of the supplies have identical owner's manuals, why not have a link on your website where potential buyers can download it?

Bruce :: 20 Dec 2016, 14:29

Write a review


Copyright Acifica, Inc.  2006. All rights reserved.

Mobile Site

eCommerce by CubeCart